Blackberry Curve (8300) Modem on OSX

BELOW IS MORE OF A REFERENCE

Install the BlackBerry Modem Script

Save a copy of the extensionless Custom Blackberry 8300 modem script to the “Modem Scripts” directory on your Mac: Finder ? Hard Disk ? Library ? Modem Scripts

Pair the BlackBerry Curve with your Mac

Okay, now to pair the BlackBerry and Mac via Bluetooth. Crack open your BlackBerry, go to “Manage Connections”, and enable Bluetooth via checkmark (the icon should then show a yellow minus icon). Then, go to “Bluetooth Options”, press the menu key, select “Options”, and ensure that the “Discoverable” option is set to “Yes”.

Now, open System Preferences on your Mac and open the “Bluetooth” configuration panel. Enable Bluetooth and make it “Discoverable”.

Next, within the System Preferences panel, select the “Devices” tab and click “Set Up New Device…” to begin the setup process.

The first step in the device setup process is a “Welcome” screen. Click continue. Next, in the “Select Device Type” screen, select “Any Device” from the list and click “Continue”. Next is the “Searching” screen, which eventually (it may take a few moments) should indicate your BlackBerry device as a mobile phone. After the device is found, select in the list and click “Continue”.

Next is the “Gathering Information” screen, which displays the progress of the information gathering process. Wait until the process is complete and then click “Continue”. The next screen displays the all-important passkey. . At this time, your BlackBerry should display its “Enter Numeric Passkey” prompt. Enter the passkey in the field provided (Note: there is a limited amounted of time for this step — if necessary, click “Go back” on the Mac and try again).

Upon successful entry of the passkey, a “Pairing Complete” message appears briefly, and a confirmation prompt appears asking if you would like to “Accept connection request from mac?”. First, select “Don’t ask this again” and then click the “Yes” button.

Configure the Bluetooth Connection

So far so good. We are almost finished! Now it is time to configure the Bluetooth connection. On your Mac, the “Devices” subpanel (System Preferences ? Bluetooth ? Devices tab) should display the BlackBerry 8300 on the Bluetooth device list . Select the BlackBerry 8300 from the list and click on “Configure” to open the configuration dialogue (Note: the Device Configuration dialogue may have opened automatically after the device pairing process).

Next, in the “Select the services you want to use with your mobile phone” screen, select “Access the Internet with your phone’s data connection” and also select “Use a direct, higher speed connection to reach your Internet Service Provider (GPRS, 1xRTT)” . Click “Continue”.

Then, in the Username/Password screen, leave the username and password fields blank, and enter *99***1# for the GPRS CID String. For the modem, click the dropdown menu and select the custom modem script, “BlackBerry 8300”. And finally, select “Show Modem status in the menu bar” and then click “Continue”.

Upon successful completion of the device configuration process, the “Congratulations” screen will display: “Accessing the Internet using a high speed wireless data service (e.g. GPRS) from your wireless operator.” — Excellent. Click “Quit” to seal the deal.

Connect to the Internet via BlackBerry

With everything properly connected and configured, we are ready now to connect to the Internet. Click on the small ‘Modem Status’ (telephone) icon in your menu bar and select “Open Internet Connect…”.

Within the Connections dialogue box, select the Bluetooth tab and populate the form fields with the following information:

Telephone: wap.voicestream.com (T-Mobile) or wap.cingular (Cingular/AT&T)

Username: guest (T-Mobile) or WAP@CINGULARGPRS.COM nstall the BlackBerry Modem Script