HP iLo

>hpiLO-> help


status=0

status_tag=COMMAND COMPLETED

Mon Aug 18 18:39:01 2014




DMTF SMASH CLP Commands:


help    : Used to get context sensitive help.

show    : Used to display values of a property or contents of a collection target.

show  -a  : Recursively show all targets within the current target.

show  -l   : Recursively show targets within the current target based on 'level' specified.

         Valid values for 'level' is from 1 to 9.

create  : Used to create new instances in the name space of the MAP.

 Example: create /map1/accounts1 username= password= name=

  group=


delete  : Used to destroy instances in the name space of the MAP.

 Example: delete /map1/accounts1/


load    : Used to move a binary image from an URL to the MAP.

 Example : load /map1/firmware1 -source http://192.168.1.1/images/fw/iLO4_100.bin


reset   : Causes a target to cycle from enabled to disabled and back to enabled.


set     : Used to set a property or set of properties to a specific value.

start   : Used to cause a target to change state to a higher run level.

stop    : Used to cause a target to change state to a lower run level.

cd      : Used to set the current default target.

   Example: cd targetname

date      : Used to get the current date.

time      : Used to get the current time.

exit    : Used to terminate the CLP session.

version : Used to query the version of the CLP implementation or other CLP elements.


oemhp_ping    : Used to determine if an IP address is reachable from this iLO.

Example : oemhp_ping 192.168.1.1 , where 192.168.1.1 is the IP address that you wish to ping


oemhp_loadSSHKey    : Used to authorize a SSH Key File from an URL.

Example : oemhp_loadSSHKey -source http://UserName:password@192.168.1.1/images/SSHkey1.pub

oemhp_deleteSSHKey    : Used to remove a SSH Key associated with a user

Example : oemhp_deleteSSHKey


HP CLI Commands:


POWER    : Control server power.

UID      : Control Unit-ID light.

NMI      : Generate an NMI.

VM       : Virtual media commands.

LANGUAGE : Command to set or get default language

VSP      : Invoke virtual serial port.

TEXTCONS : Invoke Remote Text Console.




>hpiLO->