METHOD RACE WHEELS INTRODUCES THE NEW 416 UTV BEAD GRIP & BEADLOCK WHEELS

High-Performance Wheels For High-Performance Machines.

APRIL 16, 2026 – Method Race Wheels expands its industry-leading UTV lineup with the introduction of the 416 UTV Bead Grip and 416 UTV Beadlock, purpose-built wheels engineered to deliver uncompromising strength, performance, and aggressive styling for the most demanding off-road environments.

The 416 UTV Bead Grip and Beadlock wheels are designed to meet the high demands of modern high-performance UTVs with race-proven technologies, higher offsets, grade 8 beadlock hardware, and class leading 1,800-lb load ratings. From wide open deserts to rock crawling and everything in between, the 416 is built for drivers who push their machines to the limit.

Method 416 UTV Bead Lock Wheel

Built from solid A356 aluminum with T6 heat treatment, the 416 UTV Bead Grip and 416 UTV Beadlock deliver exceptional durability, impact resistance, and performance in extreme conditions. Both feature a reinforced inner lip for added strength and Method’s patented Bead Grip Technology®, which uses integrated grooves on the inner and outer bead seats to engage the tire bead for enhanced retention under extreme side loads and lower tire pressures. The 416 UTV Beadlock takes it a step further with aforged 6061-T6 aluminum V.8 beadlock ring, providing maximum security and confidence when it matters most.

Method 416 UTV Bead Grip Wheel

Visually, the 416 UTV Bead Grip and Beadlock stand out with an aggressive split-spoke design, debossed METHOD logos, and a new snap-in TOPO center cap featuring an embossed Method logo. Finished in Gloss Black or Machined, the wheel delivers a clean yet commanding presence on any UTV build.

416 UTV BEAD GRIP – KEY FEATURES

• Patented Bead Grip Technology® engages tire bead for increased grip at low tire pressures

• Solid A356 aluminum construction with T6 heat treatment

• Aggressive split-spoke design with debossed METHOD logos

• Reinforced inner lip for extreme strength and durability

• Aggressive safety hump on bead seats further prevents de-beading

• NEW snap-in TOPO center cap with embossed METHOD logo

• Bead Grip® badge inset on spoke

• 1,800-lb load rating

416 UTV BEADLOCK – KEY FEATURES

• Solid A356 aluminum construction with T6 heat treatment

• Aggressive split-spoke design with debossed METHOD logos

• Reinforced inner lip for extreme strength and durability

• Forged 6061-T6 aluminum V.8 beadlock ring

• Patented Bead Grip® bead seats on inner lip

• Grade 8 black or zinc-plated beadlock hardware included

• NEW snap-in TOPO center cap with embossed METHOD logo

• 1,800-lb load rating

AVAILABLE SIZES & SPECIFICATIONS

15×7 | Offset: +55 (6+1) – Polaris Models

• Backspace: 6.10

• Bolt Pattern: 5×4.5

• Weight: 17.53 lbs (Bead Grip), 18.32 lbs (Beadlock)

15×7 | Offset: +74 (6.4+0.6) – Can-Am Models, Kawasaki Teryx

• Backspace: 6.90

• Bolt Pattern: 6×5.5

• Weight: 17.28 lbs (Bead Grip), 19.18 lbs (Beadlock)
  

The post METHOD RACE WHEELS INTRODUCES THE NEW 416 UTV BEAD GRIP & BEADLOCK WHEELS appeared first on UTV Guide.

View the full article